Skip to main content

Pump and Types of Pumps

Pumps




  Pump is a device that moves the fluid some times slurry by the mechanical action,typically converted from electrical energy to hydraulic energy. Pumps can be classified into two major group by there action of moving fluid Direct lift and displacement.

Types of Pumps

 The pumps are mainly classified in two basic types Dynamic pumps and positive displacement pumps


1)Dynamic Pumps:- Dynamic pumps classified in lot of types but we are going to discus some of them like centrifugal pumps.

Centrifugal Pumps:-These types of Pumps are most commonly used in worldwide.The working is simple,described well and carefully tested.This pumps are strong,efficient and cheap to make.Centrifugal pumps are transport fluid by conversion of rotating energy into kinetic energy of fluid.




2) Positive Displacement pumps:- Positive Displacement pumps classified into lots of types but we are going to discuss about Diaphragm pump.

Diaphragm Pump:-These pumps are also known as a AODD(Air operated Double Diaphragm)pumps.These pumps are responding pumps and include two Diaphragm driven by compressed air.These pumps are used to transport Chemical,food manufacturing,underground coal mine.




Comments

  1. Anny FrankMarch 31, 2021 at 4:51 AM

    We provide all heat pump services at reasonable rates, whether it's installation, replacement, or heat pump repair in Stony Brook, NY. Get your heat pump fixed by our well-trained and qualified technicians. Call 631-928-1250 to know more about our services.

    ReplyDelete

Post a Comment

Popular posts from this blog

How to control Temperature and Humidity in Air Handling Unit

  How to control Temperature and Humidity in Air Handling Unit Overview Air Handling unit is a system used to supply temperature and Humidity controlled filtered air to the cleanroom. For air filtration various types of filters are used in AHU. And for temperature and Humidity controlling cooling and heating coils are provided in AHU. Goals Control the temperature of air used in the cleanroom  Control the humidity of air used in cleanroom  Air filters Specifications    The air Handling unit consists of Air filter  Cooling coil Heating coil Air blower HEPA Filter  Controlling of Temperature and Humidity  By Cooling Method  The cooling coil recirculates the chilled water having temperatures between 4°C to 6°C. This chilled water comes from the Chiller through centrifugal pumps. When we start the Air Handling unit blowers sucks the air through the pre filters of the air Handling unit. When blowers sucks air, it passes through the cooling co...
2 comments
Read more

AIR FLOW, AIR VELOCITY, ACPH, AHU CAPACITY

Air Changes per Hour AIR VELOCITY AND ACPH OF ROOM OR AREA   Procedure to be followed: Air Velocity Measurement and Calculation of Air Changes: Objective : To demonstrate  that the   air system is balanced and capable of delivering air velocities and providing number of air changes per hour in the respective rooms as   per requirement. Equipment to be used: Hotwire Anemometer or capture Hood Pre Requisite: Air Volumes through supply and return grills and filters should be adjusted as per the design requirement of Air Change Rate and Differential Pressure. Test Method : Ensure that the Supply blower of the AHU is "ON" prior to the start of the observations. For compliance of air change rate, velocity to be measured at 5   different locations to below the each terminal or Grill (Four Corners and center) with the help of calibrated Anemometer. Calculate the   average  velocity of the air coming from Plenum HEPA filter / supply air grill. Calculate the air...
4 comments
Read more

HVAC Validation In pharma Industries

HVAC VALIDATION As per ISO guidelines for HVAC validation. In HVAC Validation  below points are determined and validated that they are in within range as per designed which will pass the respective ISO standard class acceptance criteria. 1)Air velocity and CFM calculation 2)Air changes per hour 3) Installed filter leakage test 4) HEPA filter integrity test 5)Air flow pattern test or smoke test 6)Partical count test 7)Total variable count 8) Temperatur and pressure monitoring 9) Temperature and Humidity recovery test 10) Fresh air calculation All this points are determined recorded in documents.All this validation process done by validation contractors under observation of respective company Engineer. 1) Air velocity and CFM calculation :-   - Scan the area of the HEPA filter with probe of anemometer 6 inches from the filter face. - For accurate velocity take the velocity of air at five place of filters ( Four corners and centre of filter) - Record the air velocity i...
6 comments
Read more